Advantages of using melt pump
Out of the installation of the Batte melt pump
Batte Machinery Zhengzhou Co.,Ltd. is the production of melt pump main function in the production line is from extrusion machine high temperature melt pressure, stabilized flow steadily into extrusion die. The ability of stabilizing the feed pressure and flow rate is better than that of various types of extruder. The benefit of the whole production line can be increased obviously when it is used in series with single screw extruder or co rotating twin screw extruder.. The main benefit of applying melt pump is:
1 minimize the size of the product and minimize the weight of the material to make more products.. In the extrusion of the size of the product requirements or the strict cost of raw materials, the use of the melt pump more necessary, more valuable.
2 the same as the twin screw extruder and the melt pump into mixing extrusion granulation production line, the mixing quality and output ratio of the double screw granulation unit greatly improved. The energy consumption of each kilogram of material can be reduced about twenty-five percent.
3. In the original single screw or the same direction twin-screw granulation extrusion machine to install melt pumps and pipes, plates, film extrusion die, can dispense with the granulation process directly extruded products. This system is suitable for the extrusion of the material of the material needs to be modified by the occasion of the blending. The melt pump system has the advantages of the above second, but also through the production process of the simplified extrusion products, shorten the production cycle to achieve energy saving.
4. Can be achieved with much Taichun small extruder and to a melt pump feeding, the melt via melt booster pump metering supply die extrusion large products (pipes with large diameter, wide plates, film). The configuration of the production line is compact and the size of the product is small. The cross-sectional size of the extrusion product is more precise and easier to control..
5 in the single screw exhaust extruder configuration of the melt pump, can make the operation of the system freely, excellent performance. Under the high nose pressure and high output, the extrusion amount can be adjusted freely and no material conditions appear..